products

New Products

stud-finder-basic

Stud Finder Basic

click_here click_here_for_video
  • Sizes Available: 25 mm (79023) / 35 mm (79024) /
    35 mm with Magnet (79025) / 45 mm (79026)

  • For installing handrails, curtain rods, or hanging heavy pictures, one would need to know where the wall studs are. For that purpose, this manual stud finder is a great tool that can find where the wood or iron (79025 only) studs are. With a thin sturdy needle, one can find the studs quickly with just a few pokes into the wall.

  • This manual stud finder also comes with a large lock switch that makes work smoother, and ensures the safety one’s hands.

every_circular_saw_guide_explained_page_2

Every Circular Saw Guide Explained(Page 2)

click_here click_here_for_video
  • Circular Saw Guide L-Angle Foldable
  • Equipped with a foldable feature, this compact saw guide is suitable for transportation and safe keeping. When contracted, it can also be used as a cutting ruler.

  • Circular Saw Guide L-Angle Plus
  • Equipped with non-slip rubber, this saw guide is able to slide/stop with just a simple push of the handle, and is also able to stand completely straight thanks to the heel shape.

every_circular_saw_guide_explained_page_1

Every Circular Saw Guide Explained(Page 1)

click_here click_here_for_video
  • Circular Saw Guide T-Slide II
  • Equipped with a stabilizer that prevents arm from shaking during processing. This saw guide is suitable for processing long and thin materials or creating rip cut.

  • Circular Saw Guide L-Angle Fit
  • A high fence that fixes tightly to the wood, this saw guide comes in 3 sizes that is suitable for cutting two-by-four lumber, floorboards and all kinds of small materials.

  • Circular Saw Guide Free Angle Neo
  • Suitable for scribing angles and processing angular cuts on lumber.

sliding_bevel_8_inch_and_10_inch

Sliding Bevel 8"/ 10"

click_here
  • Dimension and weight:
    (33919) 235 x 22 x 17 mm, 120 g
    (33921) 285 x 25 x 17 mm, 160 g

  • For laying out and transferring angles, an easily adjustable bevel that locks firmly and doesn’t’ budge until needed is a crucial tool to have. Combining the feature of an unobtrusive locking screw located at the rear of the tool, this tool can be a game-changer to have in your toolbox.

  • With a handle made of solid aluminum and a steel blade, this sliding bevel is ready for any project ranging from detailing to heavy-duty.

thread-reel-2

Thread Reel Ⅱ Auto-rewind Red / Hand-rewind Green

click_here
  • Thread Length: φ0.6 mm x 15 m (77446) / φ0.6 mm x 30 m (77456)

  • Our Thread Reel II is a layout tool that helps you confirm if a structure is straight and even. This compact dry line comes with a string-locking system for both models (auto-rewind red and hand-rewind green).

  • In addition to the simple assembly and disassembly feature, the two pins feature ensures stability when checking for a straight line. The pins also come with a cover for safekeeping.

Flush_Ended_Stainless_Steel_Rule_with_4_Scales

Flush Ended Stainless Steel Rule with 4 Scales

click_here
  • Length Tolerance: ±0.15 mm (comparable with JIS Grade 1)
  • Body Size: 150 x 20 x 1.0 mm (24611), 300 x 30 x 1.0 mm (24612)
  • Weight: 23 g (24611), 70 g (24612)

  • With zero points on both ends, this flush ended stainless steel ruler simplify the reading of measurements. In addition, two different graduations on one ruler, a 0.5 mm pitch on the front and a 1.0 mm pitch on the back.

  • Designed from hardened and tempered stainless steel, this wide and rigid stainless steel ruler can withstand heavy-duty uses suitable for various tasks.

taper_gauge

Taper Gauge 5/8″ / 5/8″ x 15mm

click_here
  • Accuracy: ±0.002 in (±0.05 mm)
  • Measuring Range: 1/16 - 5/8 in (1 - 15 mm)
  • Body Size: 5-43/64" x 43/64" x 3/64" (148 x 17 x1.2 mm)

  • Made from hardened stainless steel, this is a useful tool for quickly measuring openings, slot width or gap slots, etc. US standard measurement on one side, and metric on the opposite side (62607).

  • Place the taper gauge into the slots, poles or gaps and get the measurement in seconds. Perfect for those in need of a quick measurement of a hole width or diameter.

taper_gauge_abs

Taper Gauge ABS Resin 1-15mm White

click_here
  • Accuracy: ±0.2 mm
  • Measuring Range: 1 – 15 mm
  • Body Size: 150 x 18.3 x 5 mm

  • Made from ABS resin, this is a handy tool for swift measurements of openings, slot width or gap slots, etc., while preventing scratches on the surface.

  • This taper gauge comes with an easy pick-up design and 4 notched intervals to snap off, should you need to measure the width or diameter of shallow gaps.

precision-square

Precision Square with Base JIS Grade 2 Comparable

click_here
  • Angle Tolerance: ±(20 + l / 10) μm where l is the nominal length (mm)
  • Manufacturing comparable to JIS B7526 Grade 2
  • Body Size: 7 length available (50 mm - 300 mm)

  • Manufactured from S50C Carbon Steel, this precision square has precise angle measurement which makes it an excellent tool for surface checking and other angle checking work. Also used by woodworking users who demand precision.

  • This square also comes with a factory warranty to show how confident we are when dealing with precision and accuracy (However, rough handling or dropping of the tool would void this warranty).

miter-rule-3d-45-90-two-by-four-clear

Miter Rule 3D 45° 90° Two-by-Four Clear

click_here click_here_for_video
  • Angle Tolerance: Less than 0.2 mm per 100 mm
  • Scale Tolerance: ±0.2 mm
  • Measuring Range: 1 - 150 mm

  • Designed for working with "2 x 4 lumber", this miter ruler boasts a variety of functions to ease the workload. Pencil guide holes for dividing lumber into halves (lap joints), thirds (Mortise and Tenon (M&T), bridle joint, etc.) and quarters (finger joints).

  • It is able to simultaneously confirm and scribe 90° and 45° angles. Made from clear polycarbonate, you can see your marks through the square and prevents scratching the surface.
Products